How do I setup a New Service User

How do I setup a New Service User

details pending
    • Related Articles

    • How do I setup my hub?

      To get started with your hub: 1. Remove your hub from the packaging. 2. Place your hub on a safe flat surface, away from risk of being knocked onto the floor or similar: CareSmart Hub on flat surface 3. Connect the USB cable to the supplied power ...
    • How do I setup my motion sensor?

      To get started with your motion sensor: 1. On the back of the device is a power switch. Turn this switch to the LEFT to the ON position. You may wish to use a pin or a tooth pick to assist you: Turn to LEFT to switch ON2. After turning on the sensor, ...
    • How do I setup my appliance sensors

      To get started with your appliance sensor: 1. Check which appliance sensor you have - CareSmart has two types. Both operate in the same way but look different.  Type A:  Type A Type B: Type B 2. Plug your appliance sensor into the wall outlet, and ...
    • Quick Start Guide - Setting Up CareSmart

      We've created the CareSmart Quick Start Guide to help you get started with your new kit quickly and easily.  Page 1 Page 2
    • How do I update my Payment Method

      If you'd like to update your payment method, or if you have received a replacement card from your bank, it may be necessary to update your subscription with your new card details. To do this, it will be necessary to speak with one of our support team ...