How do I setup my hub?
To get started with your hub: 1. Remove your hub from the packaging. 2. Place your hub on a safe flat surface, away from risk of being knocked onto the floor or similar: CareSmart Hub on flat surface 3. Connect the USB cable to the supplied power ...
How do I setup my appliance sensors
To get started with your appliance sensor: 1. Check which appliance sensor you have - CareSmart has two types. Both operate in the same way but look different. Type A: Type A Type B: Type B 2. Plug your appliance sensor into the wall outlet, and ...
How do I setup my motion sensor?
To get started with your motion sensor: 1. On the back of the device is a power switch. Turn this switch to the LEFT to the ON position. You may wish to use a pin or a tooth pick to assist you: Turn to LEFT to switch ON2. After turning on the sensor, ...
All Device Alerts
Remember: the CareSmart system is designed for activity monitoring. It is not intended to be used or relied upon as an emergency alarm system or a life monitoring service. Introduction: The "All Device" alerts allows you to be notified if there has ...
Quick Start Guide - Setting Up CareSmart
We've created the CareSmart Quick Start Guide to help you get started with your new kit quickly and easily. Page 1 Page 2